Need PC Tech Help? Post here.
Comments
-
Ok so I need some COMPETENT diagnosis for this...
I got a Asus M5A88-M-EVO, socket AM3+ motherboard.Recently I got a power failure for like 10 seconds and I found out that my PC keyboard stopped working and the printer too.They were both plugged in the 2 USB 3.0 ports.
Now I can't see the USB 3.0 ports in device manager(windows 7) and everything I plug into the 3.0 USB ports is not working. All the 2.0 USBs are working.I mention that the PC shut down and I had to restart it.
Should I try to reinstall the windows or could it be a hardware problem? The motherboard is 2 months old so I still can get a replacement for it.
Thanks in advance. -
Re install your USB 3.0 drivers.datSEXYBEAST wrote: »Ok so I need some COMPETENT diagnosis for this...
I got a Asus M5A88-M-EVO, socket AM3+ motherboard.Recently I got a power failure for like 10 seconds and I found out that my PC keyboard stopped working and the printer too.They were both plugged in the 2 USB 3.0 ports.
Now I can't see the USB 3.0 ports in device manager(windows 7) and everything I plug into the 3.0 USB ports is not working. All the 2.0 USBs are working.I mention that the PC shut down and I had to restart it.
Should I try to reinstall the windows or could it be a hardware problem? The motherboard is 2 months old so I still can get a replacement for it.
Thanks in advance.
Found here under USB:
http://www.asus.com/Motherboards/AMD_AM3Plus/M5A88M_EVO/#download -
CrackinDomes wrote: »Re install your USB 3.0 drivers.
Found here under USB:
http://www.asus.com/Motherboards/AMD_AM3Plus/M5A88M_EVO/#download
I disabled all my 3.0 USB ports , restarted the PC , enabled them and they work now.Thanks for the reply tho
-
-
How important is thermal paste?
When I was installing my CPU I had to remove the fan and I don't know how it affected the paste.
It was still fresh so it might have spread but when I put it back on it was in a circle around where the fan was.
So does it have to be spread directly on the bottom or is it ok around?
Not sure if it made much sense. -
Oh, I forgot to say.. I keep one side open from the case. ^^'
Doesn't help.
And I can't yet make any changes on it, since I have.. warranty(?) left..
So some other suggestions, please.
^^'
http://www.almico.com/sfdownload.php
click on where it says SpeedFan 4.47. -
You want it even across the whole top of the CPU and to be as close to the same all around. So you don't get hot spots on the chip. Also to much is a bad thing and too little is a bad thing. Can't be exact on whats perfect as everyone is different and applies it different.How important is thermal paste?
When I was installing my CPU I had to remove the fan and I don't know how it affected the paste.
It was still fresh so it might have spread but when I put it back on it was in a circle around where the fan was.
So does it have to be spread directly on the bottom or is it ok around?
Not sure if it made much sense. -
How important is thermal paste?
When I was installing my CPU I had to remove the fan and I don't know how it affected the paste.
It was still fresh so it might have spread but when I put it back on it was in a circle around where the fan was.
So does it have to be spread directly on the bottom or is it ok around?
Not sure if it made much sense.
Wait, are you applying new paste?
If you separate the heatsink away from the CPU then you would highly consider using new paste.
Clean off both the heatsink and CPU surface(preferably with a micro-fiber cloth) and then reapply new paste. -
It was the paste that came pre applied to the fan.
I had to remove the fan once while building the computer so the paste was spread in a circle around the base of the fan instead of directly under.
For the moment would I be ok while I order new paste? -
If not sure just be safe and grab so new paste and reapply it.It was the paste that came pre applied to the fan.
I had to remove the fan once while building the computer so the paste was spread in a circle around the base of the fan instead of directly under.
For the moment would I be ok while I order new paste? -
Now I need my modem drivers.
Can't connect to the internet so I need the drivers.
I've been googling and can' find anything that works.
When I went from vista to xp I remember DLing something but I can't remember as it was a while ago.
It's for windows 7. -
Whats your mobo?Now I need my modem drivers.
Can't connect to the internet so I need the drivers.
I've been googling and can' find anything that works.
When I went from vista to xp I remember DLing something but I can't remember as it was a while ago.
It's for windows 7. -
Asus M5A78L-M LX PLUS Micro ATX AM3+
I have internet now using Driver Pack Solution, but it's a bloated program, installs russian sht, and is an outdated version.
My internet keeps constantly disconnecting so I need to see if installing/updating the modem driver will fix it.
It might be it because the modem in devices says it has no drivers, I guess the only thing I installed was the network driver and I need the modem one. -
I don't know everything. Nor ever claimed to know so. But I will try my best to provide information and if not at least try to point you in the right direction for the needed info.What would I do without you Domes.
It hasn't disconnected in 30 mins+ so I hope it's fixed.
Now I'm downloading steam games. -
-
http://pcpartpicker.com/p/s7Q2CrackinDomes wrote: »Yes all is compatible. Could save some money a couple different ways but ya.
after a few revisions....should be able to run any game out there -
CrackinDomes wrote: »Should run everything.
If it had RAM.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231416
The mobo comes with that ram for free....It looks decent any opinion? -
CrackinDomes wrote: »Oh well in that case. That is all good to go then.
Best rig that event your holding for me :P
Next issue:
200 dollar budget
23" screen (Thinking about 140)
wireless mouse (thinking 20 maybe logitech)
mouse pad(thinking 20)
wireless adapter (20)
Newegg and amazon only please...
Even if you have to you can move mouse pad to like 10 and get a 30 dollar wireless mouse...or any combo.... -
I will take care of this when I get home and back on my MAIN PC. At work at the moment.Best rig that event your holding for me :P
Next issue:
200 dollar budget
23" screen (Thinking about 140)
wireless mouse (thinking 20 maybe logitech)
mouse pad(thinking 20)
wireless adapter (20)
Newegg and amazon only please...
Even if you have to you can move mouse pad to like 10 and get a 30 dollar wireless mouse...or any combo.... -
CrackinDomes wrote: »I will take care of this when I get home and back on my MAIN PC. At work at the moment.
Monitor
http://www.newegg.com/Product/Produc...82E16824001546
mouse pad
http://www.newegg.com/Product/Produc...me=SteelSeries
mouse
http://www.amazon.com/Logitech-910-0...0202569&sr=8-6
seem good?
I know I need an adaptor to plug the monitor into my video card..
http://www.newegg.com/Product/Product.aspx?Item=N82E16812119012 -
Top 3 are bad links. Also a monitor should come with a DVI cable and a VGA. No need to buy another one.Monitor
http://www.newegg.com/Product/Produc...82E16824001546
mouse pad
http://www.newegg.com/Product/Produc...me=SteelSeries
mouse
http://www.amazon.com/Logitech-910-0...0202569&sr=8-6
seem good?
I know I need an adaptor to plug the monitor into my video card..
http://www.newegg.com/Product/Product.aspx?Item=N82E16812119012 -
Any last minute words of advice?
http://pcpartpicker.com/p/s7Q2
----
RAM (Free with mobo)
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231416
Mouse pad:
http://www.amazon.com/gp/product/B000UEZ36W/ref=ox_sc_act_title_1?ie=UTF8&smid=ATVPDKIKX0DER
Mouse:
http://www.amazon.com/gp/product/B003NR57BY/ref=ox_sc_act_title_2?ie=UTF8&smid=A29DCW10EDCQGB
Thanks alot!!!!
Categories
- All Categories
- Z8Games
- Off-Topic - Go To Game OT Forums
- 1 Z8 Forum Discussion & Suggestions
- 16 Z8Games Announcements
- Rules & Conduct
- 5.2K CrossFire
- 951 CrossFire Announcements
- 942 Previous Announcements
- 2 Previous Patch Notes
- 1.4K Community
- 122 Modes
- 600 Suggestions
- 85 Clan Discussion and Recruitment
- 274 CF Competitive Forum
- 19 CFCL
- 26 Looking for a Team?
- 703 CrossFire Support
- 52 Suggestion
- 116 Bugs
- 29 CrossFire Guides
- 166 Technical Issues
- 47 CrossFire Off Topic