ah fck

help me, i have netgear dgn2000 and the internet light is red and i cant use the internet except access netgear page (my ip on the address)

Comments

  • The best thing you can do is call your ISP. Alot of things can be wrong with it.
  • netgear_dgn2000.jpg
    here's the router i have, at the right side, i press those 2 buttons for 5 sec, (wireless and wps buttons that turn ons and turns off the wireless/wps) it says it'll to reset everything (according someone) , after that, the internet's been red the whole time.

    now i need a way to undo all this thing


    This is exactly what i did:
    Using the Wireless On/Off and WPS Buttons to Reset the Router
    To restore the factory default configuration settings without knowing the administration password
    or IP address, you must press the Wireless On/Off and WPS buttons on the side panel of the router
    simultaneously.
    1. Press and hold the Wireless On/Off and WPS buttons until the Power LED blinks red (about
    6 seconds).
    2. Release the Wireless On/Off and WPS buttons and wait for the router to reboot.The Power
    LED will blink red three times and then will turn green when the default configuration settings
    have been restored

    THIS IS WHAT I DID, NOW THE INTERNET IS ****ED UP
  • I use to have that modem. As soon as I updated to windows 7 it stopped working. The network driver was not compatible or leave it unplugged for a while and try again. Or call your isp and they can send a tech to your house and fix it
  • I use to have that modem. As soon as I updated to windows 7 it stopped working. The network driver was not compatible or leave it unplugged for a while and try again. Or call your isp and they can send a tech to your house and fix it

    actually that's false, i've been using the router with 7 and had no problems at all.
    now, i know the problem, the problem is, when i reset the router that changed it backed to default settings, it must've done something to the internet that made it red like that

    i'll try few other things to solve it, if not working, i'll call a tech