Disconnect Due to Incorrect Map Info/Hack Tool Detected
Comments
-
WHAT TO DO DAMN 255220-4 IS THE ERROR? FROM SEVERAL HOURS STILL ME HOW GAME CRASHES THIS IS NOT BY ANY Hacktool, I AM RUNNING WHERE TO WINDOWS AND CF! TELL ME THE **** THAT THESE PROGRAMS IS TO MAY Hacktool IT OFF! RATHER THAN MAKE NEW MAPS AND OTHER SUCH PROBLEMS ARE MORE IMPORTANT JOBS!!!
I apologize for formulations, but nerves incur me already, because I had beautiful for report hakers and unfortunately, three cases of I has thrown out from game, last case on 3 seconds before end of map -
Brian_Griffin wrote: »This is getting ridiculous with the errors. The hackers never get anything done to them but i play for 5 minutes and get "hack tool detected".
Dude i get the same thing man :S i dont even hack and it says: Hack Tool Detected, while they let the real hackers just play :S. -
was calm and there is again the same thing! Hacktool detected (1) (2.0) (1) (4.0) and 255220-4 !!!!!!!! What does that mean because despite the fact that not even hacking and hackers are racing all my problems with the game and they do not !!!!!!! However, you may need to cheat to be able to play normally?
-
[MOD]Greycloak wrote: »It appears that this error is being caused by certain routers forcibly shutting down the connection to the Crossfire servers. Most home routers have a hardware firewall built into them, which is causing these connections to be dropped.
The first solution, although not optimal, is to connect your computer directly to your modem rather than the router. This should resolve the problem.
The second solution is a little more detailed. Consult your router's documentation on how to either disable the router's firewall, or place your computer in the demilitarized zone (DMZ). Unfortunately because of the sheer number of different routers I am unable to provide a how-to here on the forum. If you are not using a router, be sure to allow all traffic from the the following IP addresses:
SERVER1=74.200.6.161
SERVER2=74.200.6.163
Here are links to the support pages of the most common router manufacturers:
Linksys
http://www.linksysbycisco.com/EU/en/support
Netgear
http://kb.netgear.com/app/
Belkin
http://www.belkin.com/support/
If you would like to try and find the router settings for yourself, you can follow these steps to get to the router's setup screen:
- Go to http://www.routerpasswords.com/ and find the default password for your router
- Open a command prompt window
- Enter IPCONFIG and press enter
- Write down both the IP address and Default Gateway
- Open your web browser and browse to the default gatewayfrom the last step
- Example: if the Gateway was 192.168.1.1, enter http://192.168.1.1
Enter the username and password and you will be presented with the router's configuration page. Look for security and/or firewall options. If trying to move the computer to the DMZ, use the IP address that was listed when you did IPCONFIG.
Once the router's firewall is disabled or the computer placed in the DMZ you will want to make sure that the windows firewall is active, as you will no longer be getting firewall protection from the router.
If you need assistance with this issue, feel free to visit us in the Crossfire IRC chat. The link is in my signature. If I am online and available I would be happy to walk you through the process of configuring your router.
[UPDATE 5/30/2010]
Earlier today I assisted someone on IRC that has been experiencing this error. Upon checking out his router settings, I noticed that the firewall was set by default to a very strict blocking mode. One I added the Crossfire ports of 13008 and 16666 to his firewall exceptions he was able to play without error.
I urge everyone who is experiencing this problem to familiarize yourself with firewall settings, especially router firewalls. There are far too many different models of routers for me to make a specific guide. As always, if you see me in the IRC chat I can assist you with this in realtime.
[Update 7/27/2010]
I just finished working with someone on IRC that was experiencing these disconnects, but had no router. When he disabled the windows firewall he was able to play without disconnects. I currently have him testing some port exceptions with the firewall. If this works, then I am confident that simply forward ports 10009, 13008 and 16666 (TCP/UDP) will resolve the problem. Upon confirmation of the fix I will post a guide on how to alter windows firewall port settings. -
-
Damn it when I finally naprawicie these errors in the game and you will be able to play normally without eternal Trigger? Yesterday I could barely do the mission again today I have a problem with the game, in addition, I wanted to ponder on these 80 MM kill and, unfortunately, already had about 60 counter reset itself to me: / What does this mean ???????????
-
errors
I just changed servers and got about 2-3hours in without "Hack Tool Detected 1 (4.0)"
to may usual 1 to 10 minutes on my regular server. So really I mean my router is working
If CF was blocked wouldn't it not work at all?
Is it possible someone has found an exploit and has made a boot app of some sort.
During daylight hours its not so bad for me, but at nighttime i get like 2 mins in b4 it happens.
Upnp is already enabled.
I'm thinking I might post a reply to this thread everytime it happens. -
Ok after may last post I looked at my firewall settings and Upnp was not selected
I ticked the box and I played a few hour last night and a few today with no problem.
But it just happened again...
I have deleted all CF directory's and reinstalled.
changed my password and
Upnp is enabled on both my Modem & firewall.
This discussion has been closed.
Categories
- All Categories
- Z8Games
- 1 Z8 Forum Discussion & Suggestions
- 15 Z8Games Announcements
- Rules & Conduct
- 2K CrossFire
- 599 CrossFire Announcements
- 603 Previous Announcements
- 2 Previous Patch Notes
- 164 Community
- 12 Modes
- 284 Suggestions
- 16 Clan Discussion and Recruitment
- 38 CF Competitive Forum
- CFCL
- 14 Looking for a Team?
- 548 CrossFire Support
- 64 Suggestion
- 14 CrossFire Guides
- 33 CrossFire Off Topic