Disconnect Due to Incorrect Map Info/Hack Tool Detected
Comments
-
What am I to do if I don't know anything about the router. I play in my dorm room and the school won't give me any information. This is a major annoyance for me and may push me to quiting. I'd prefer not to quit because my college can't get a decent connection.
-
-
I really don't think they care if we dc or not.
Hi all,
I apologize for my bad English and the place where I post but these hackers **** me off ...
Here you can see in the image below 2 times ave MULTI KILL gun ....
And the score was 75 to 8 and was like .... and wall ...look this image...<><>
http://img810.imageshack.us/img810/6756/crossfirehacker.png -
[MOD]Greycloak wrote: »It appears that this error is being caused by certain routers forcibly shutting down the connection to the Crossfire servers. Most home routers have a hardware firewall built into them, which is causing these connections to be dropped.
The first solution, although not optimal, is to connect your computer directly to your modem rather than the router. This should resolve the problem.
The second solution is a little more detailed. Consult your router's documentation on how to either disable the router's firewall, or place your computer in the demilitarized zone (DMZ). Unfortunately because of the sheer number of different routers I am unable to provide a how-to here on the forum. If you are not using a router, be sure to allow all traffic from the the following IP addresses:
SERVER1=74.200.6.161
SERVER2=74.200.6.163
Here are links to the support pages of the most common router manufacturers:
Linksys
http://www.linksysbycisco.com/EU/en/support
Netgear
http://kb.netgear.com/app/
Belkin
http://www.belkin.com/support/
If you would like to try and find the router settings for yourself, you can follow these steps to get to the router's setup screen:
- Go to http://www.routerpasswords.com/ and find the default password for your router
- Open a command prompt window
- Enter IPCONFIG and press enter
- Write down both the IP address and Default Gateway
- Open your web browser and browse to the default gatewayfrom the last step
- Example: if the Gateway was 192.168.1.1, enter http://192.168.1.1
Enter the username and password and you will be presented with the router's configuration page. Look for security and/or firewall options. If trying to move the computer to the DMZ, use the IP address that was listed when you did IPCONFIG.
Once the router's firewall is disabled or the computer placed in the DMZ you will want to make sure that the windows firewall is active, as you will no longer be getting firewall protection from the router.
If you need assistance with this issue, feel free to visit us in the Crossfire IRC chat. The link is in my signature. If I am online and available I would be happy to walk you through the process of configuring your router.
[UPDATE 5/30/2010]
Earlier today I assisted someone on IRC that has been experiencing this error. Upon checking out his router settings, I noticed that the firewall was set by default to a very strict blocking mode. One I added the Crossfire ports of 13008 and 16666 to his firewall exceptions he was able to play without error.
I urge everyone who is experiencing this problem to familiarize yourself with firewall settings, especially router firewalls. There are far too many different models of routers for me to make a specific guide. As always, if you see me in the IRC chat I can assist you with this in realtime.
[Update 7/27/2010]
I just finished working with someone on IRC that was experiencing these disconnects, but had no router. When he disabled the windows firewall he was able to play without disconnects. I currently have him testing some port exceptions with the firewall. If this works, then I am confident that simply forward ports 10009, 13008 and 16666 (TCP/UDP) will resolve the problem. Upon confirmation of the fix I will post a guide on how to alter windows firewall port settings.
that code doesn't work for me and i allways ddisconnect when i use run as admin or not please how can i fix it?? -
Now new patched is givin problems to. you guy's realesed 1 more thing in the patch that is causing every one in the room's to be disconectted from the room I am seeing everyone leaving the room even me. It say's something of an error. need to check it up pliz is kiking everyone from room's.
-
Yeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUSYeppers.
they're delishious DEELISHIOUS -
I too have been getting the disconnect from room problem and even from the server. On top of that, in mid-game, I get a "CF-Client Error code number 20_0." It is extremely frustrating to be trying to complete missions and get booted from the game, or the server. Oh in case the question comes up, no, I do not hack in any-way shape, or form, I find it dishonorable to cheat in a game that's supposed to be fun and not real life.
-
This discussion has been closed.
Categories
- All Categories
- Z8Games
- 1 Z8 Forum Discussion & Suggestions
- 15 Z8Games Announcements
- Rules & Conduct
- 2K CrossFire
- 599 CrossFire Announcements
- 603 Previous Announcements
- 2 Previous Patch Notes
- 164 Community
- 12 Modes
- 284 Suggestions
- 16 Clan Discussion and Recruitment
- 38 CF Competitive Forum
- CFCL
- 14 Looking for a Team?
- 548 CrossFire Support
- 64 Suggestion
- 14 CrossFire Guides
- 33 CrossFire Off Topic