Pimp My Gun - Make Your Own Firearms
Comments
-
Zeta Arms Manufacturing is proud to release it's latest development.
The QC17 "Mako" rifle. Although hindered by featuring only a semi-automatic firing mechanism, this rifle has accuracy which has been compared to sniper rifles by testers. An integrated suppression system dampens recoil, as well as noise and muzzle flash. Also featuring a lesser version of the Barrett "blow-back" barrel system, this semi-automatic rifle can fire a large round, with less recoil.
The version pictured above the the forest variant of this firing frame. Featuring rust resistant polymer metals and carbon fiber chassis, as well as several small vent placed among the body, this weapon can remain submerged in water for up to 12 hours and still remain in usable, ready to fire condition.
Comments on this will be appreciated and returned. =D
first attemp to fix it xD
hope i got something rite
STUFF
I like it. A few things though. Shrink the flashlight ring a little, too big for it. Smaller iron sights, they stand out to much. Remove the rear mag. It just clutters up the rear of the gun. Slide the top receiver back about, 5-7 pixels. Bigger barrel if you're using that flash hider. Sounds like a lot, but it's pretty easy. Do that it'd be a really good, custom design.
-
I'm not sure if that's appropiate to the situation O_OOr tie them to a chair naked and slowly turn their private parts into sushi
Just sayin....
English or gtfo.***. Só que não entendi qual o proposito desde post -
MP5K/10 with Dual Mags and Red Dot.
niiice!
i personally liked that keychain '3'
my Scar-H Turtle Mod xD
Along with ceramic internal modifications the new barrel has an improved heat control system wich allows the weapon to sustain more fire without overheating, wich means a faster RoF, plus the high caliber of the weapon, making it better suited to CQB, but with the Semi-auto mode it can be used just fine at bigger ranges (fail logo, i know :c) -
I like some elements of the gun, but it could do with some polishing. Overall, very good, and the logo is still better than anything I come up with.
One more Mac-12, just to make you guys hate them.
As you can see, I attempted some blending, but it's a lost art in my case. -
I like some elements of the gun, but it could do with some polishing. Overall, very good, and the logo is still better than anything I come up with.
One more Mac-12, just to make you guys hate them.
As you can see, I attempted some blending, but it's a lost art in my case.
hmm... what i could improve in that gun?
also, your mac-12 looks like an TMP lol -
Damm i cannot edit my message >.>
well then, i present you guys, the M16A4 MK Mod, fitted with a normal red-dot to be versatile, covering both medium and close range engagements where it's ammo (5.56x45mm NATO) will fit it's role perfectly.
This Mod comes with an upgraded Barrel, ceramic internals and feeding system to adapt to the cold enviroment and sustain continuous fire without barrel overheating along with the improved precision and RoF to make the best 3-round burst groupings.
if you want to modify something on it PM me, i'll pass you the coding
random ACR i was making, trashed the project, wasn't looking so good >.<
-
I like some elements of the gun, but it could do with some polishing. Overall, very good, and the logo is still better than anything I come up with.
One more Mac-12, just to make you guys hate them.
As you can see, I attempted some blending, but it's a lost art in my case.
Nice solid piece. Looks more like a TMP than a Mac though. Still, awesome weapon. -
Damm i cannot edit my message >.>
well then, i present you guys, the M16A4 MK Mod, fitted with a normal red-dot to be versatile, covering both medium and close range engagements where it's ammo (5.56x45mm NATO) will fit it's role perfectly.
This Mod comes with an upgraded Barrel, ceramic internals and feeding system to adapt to the cold enviroment and sustain continuous fire without barrel overheating along with the improved precision and RoF to make the best 3-round burst groupings.
(M16A4 MK mod pic)
if you want to modify something on it PM me, i'll pass you the coding
random ACR i was making, trashed the project, wasn't looking so good >.<
(ACR picture)
The M4 is... Unique. I'm not sure about the look, but the method is superb. You've come a long way in a short time, Take.
The ACR is good, too, some unque parts adding your own style to the gun.
It was meant to look like that, so as to compete in the current market for small arms.RequiemZero wrote: »Nice solid piece. Looks more like a TMP than a Mac though. Still, awesome weapon.
Just got home from school O_O Anyways, the new scope and rail work improved the gun, but I'm still not sure about the plate rails (the long ones) they look to big IMO.awww... no toughs on mah work? :c
you meanies... xD
(Remade M4 mod)
changed the scope to a range-friendly one, also worked on the rails a little :x -
I honestly can't say. It's up to you, you're the artist.do you think it would look better with the long rail covers beign substituted by those small plates? =o
Also, sorry guys, no guns tonight from me. I've got stuff going on. Leave some suggestions for when I get back, and I'll try them out (Nothing insanely hard, plz (F3AR guns *cough*))And I'll try them when I get time on Friday. -
Meh... Decent, all I can say Lizzie.
it's IzzI LOL
from isabelle, you know? xDAKS-74U Sweeper, sweeps the dust away just like you want it.
hmm, why the scope? O_O
it isn't supposed to be a shotgun?
you'll use slugs with it?
Categories
- All Categories
- Z8Games
- Off-Topic - Go To Game OT Forums
- 1 Z8 Forum Discussion & Suggestions
- 16 Z8Games Announcements
- Rules & Conduct
- 5.2K CrossFire
- 955 CrossFire Announcements
- 945 Previous Announcements
- 2 Previous Patch Notes
- 1.4K Community
- 122 Modes
- 602 Suggestions
- 85 Clan Discussion and Recruitment
- 274 CF Competitive Forum
- 19 CFCL
- 26 Looking for a Team?
- 705 CrossFire Support
- 52 Suggestion
- 116 Bugs
- 29 CrossFire Guides
- 166 Technical Issues
- 47 CrossFire Off Topic