Pimp My Gun - Make Your Own Firearms
Comments
-
-
This looks a bit funny...
I was experimenting with the color coding system. I brightly coloured parts where you were supposed to handle it (for lack of words), like the Cheek rest, monopod, butt plate, and foregrip. All the brightly coloured parts are ungrouped from other parts, the Cheek rest made from 2 mirrored F2k chamber lids, and a cheek rest from that AK folding stock. The butt plate came from the PRS Magpul stock, and the default Mk. 14 stock. The foregrip was coloured from ungrouping the modular vertical grip.
It was more of an experiment than anything.DJultima wrote:Techno gun for the fashionable operator.
lol, I would consider it a beginner marksman weapon, because all the shooting aids are brightly coloured so you can easily recognize them. -
Newest Set
Fresh from the prototype trials is the new HH-118 set of weapons.
The HH is a revolutionary set of weapons using advanced polymer materials to make the guns durable, and light weight, but allowing them to keep maximum stopping power.
First in the set, is the AR456
The body of the popular UMP sub-machine gun was stripped down to its shell, and heavily overhauled with high grade polymer metals and heat-resistant plastics
Featuring a blistering firing rate of nearly 700 rounds per minute (Test trials)
A built in suppressor
A drum magazine loaded with nearly 60 rounds
And an enhanced recoil reduction stock enables this weapon to keep pace with almost any rifle on the market
Second in the set is the Dual M.45 BH
No pistol on the market had what we needed for development of this tool of death, so we started from scratch. Made from the same polymer metal and plastic as the AS456.
Firing rate of nearly 150 rounds per minute, this pistol isn't the best in that category (Test trials)
No suppressor, threading for one is present
12 shot magazine, 13 if you count the one in the chamber
Firing a large round gives this gun heavy recoil, nearly that of the popular Israel pistol, the Desert Eagle.
Last in the series is another pistol, the SG341
A hand held shot gun with the same polymer metal and plastic of the previous weapons.
A firing rate of the Mossberg 500 means many other shotguns should leave this one in the dust
Featuring a 5 shot magazine
This weapon replaces the heavy weapon in the series. Firing the 12 gauge grenade round designed for the AA-12, this weapon is a door buster. -
Fresh from the prototype trials is the new HH-118 set of weapons.
The HH is a revolutionary set of weapons using advanced polymer materials to make the guns durable, and light weight, but allowing them to keep maximum stopping power.
First in the set, is the AR456
The body of the popular UMP sub-machine gun was stripped down to its shell, and heavily overhauled with high grade polymer metals and heat-resistant plastics
Featuring a blistering firing rate of nearly 700 rounds per minute (Test trials)
A built in suppressor
A drum magazine loaded with nearly 60 rounds
And an enhanced recoil reduction stock enables this weapon to keep pace with almost any rifle on the market
Second in the set is the Dual M.45 BH
No pistol on the market had what we needed for development of this tool of death, so we started from scratch. Made from the same polymer metal and plastic as the AS456.
Firing rate of nearly 150 rounds per minute, this pistol isn't the best in that category (Test trials)
No suppressor, threading for one is present
12 shot magazine, 13 if you count the one in the chamber
Firing a large round gives this gun heavy recoil, nearly that of the popular Israel pistol, the Desert Eagle.
Last in the series is another pistol, the SG341
A hand held shot gun with the same polymer metal and plastic of the previous weapons.
A firing rate of the Mossberg 500 means many other shotguns should leave this one in the dust
Featuring a 5 shot magazine
This weapon replaces the heavy weapon in the series. Firing the 12 gauge grenade round designed for the AA-12, this weapon is a door buster.
Picture of the whole set.
-
Apparently, the MK. 23 was close though xD5 BH
No pistol on the market had what we needed for development of this tool of death, so we started from scratch. Made from the same polymer metal and plastic as the AS456.
Firing rate of nearly 150 rounds per minute, this pistol isn't the best in that category (Test trials)
No suppressor, threading for one is present
12 shot magazine, 13 if you count the one in the chamber
Firing a large round gives this gun heavy recoil, nearly that of the popular Israel pistol, the Desert Eagle.
Anyways, just to up my post count, a gun I made for someone's thread.
The line was just to test the Blue on Black look. Not bad if it's done right. -
Apparently, the MK. 23 was close though xD
Anyways, just to up my post count, a gun I made for someone's thread.
The line was just to test the Blue on Black look. Not bad if it's done right.
But it's not Mk .23 on it. It has a few pieces from them, but all in all, it's a completely different weapon. -
-
-
I do, but the Old PMG is my baby. New PMG just feels so... unfinished.You guys should experiment with ungrouping stuff. You can find some pretty cool parts!
This is just a test of the looks of certain non-M4 rail systems on the M4.
BaychiDa reminded me of my fondness for ludicrous Mac-11 mods. -
I do, but the Old PMG is my baby. New PMG just feels so... unfinished.
Old PMG = Presets only, can't do much else after that.
New PMG = Create any f*cking thing you want. Can even do pixel art and create your own markings on the gun. Not to mention you can color stuff anything you want. -
I've got Paint.Net if I want markings.Old PMG = Presets only, can't do much else after that.
New PMG = Create any f*cking thing you want. Can even do pixel art and create your own markings on the gun. Not to mention you can color stuff anything you want.
For example,
The killmarks on the side were done with blending and text from Paint.Net. PMG takes ALOT of time for me to make anything look good from scratch. -
Old PMG = Presets only, can't do much else after that.
New PMG = Create any f*cking thing you want. Can even do pixel art and create your own markings on the gun. Not to mention you can color stuff anything you want.
Every gun I make, I use the old PMG. I make really original stuff with it. So what you said is untrue.
Categories
- All Categories
- Z8Games
- Off-Topic - Go To Game OT Forums
- 1 Z8 Forum Discussion & Suggestions
- 16 Z8Games Announcements
- Rules & Conduct
- 5.2K CrossFire
- 955 CrossFire Announcements
- 945 Previous Announcements
- 2 Previous Patch Notes
- 1.4K Community
- 122 Modes
- 602 Suggestions
- 85 Clan Discussion and Recruitment
- 274 CF Competitive Forum
- 19 CFCL
- 26 Looking for a Team?
- 705 CrossFire Support
- 52 Suggestion
- 116 Bugs
- 29 CrossFire Guides
- 166 Technical Issues
- 47 CrossFire Off Topic