Loading map error .
Comments
-
Have you waited 5 minutes to see if it'll load without opening Task Manager?
Have you recently downloaded/installed anything out of the ordinary?
Has this always occured?
If you have any anti-virus programs, I'd suggest turning them off,
as they may conflict with Crossfire, causing loading errors. -
Have you waited 5 minutes to see if it'll load without opening Task Manager?
/COLOR]I Did , still not working[/COLOR][COLOR=Blue
Have you recently downloaded/installed anything out of the ordinary?
/COLOR][COLOR=Red]Nope , i deleted the game and downladed it again .. still the problem[/COLOR][COLOR=Blue
Has this always occured?
/COLOR][COLOR=Red]3 or 4 days ago , i installed new windows , before installation and after it the problem is still occurred[/COLOR][COLOR=Blue
If you have any anti-virus programs, I'd suggest turning them off,
as they may conflict with Crossfire, causing loading errors.
/COLOR][COLOR=Red]I turned it off , still the problem
(Note:i`m using Norton)[/COLOR][COLOR=BlueThe problem is still ocurred !!
-
Norton is the worst anti-virus protection you can get by the way, next to Mcafee, so this may be your problem.
When you re-downloaded Crossfire, were all your anti-viruses turned off during the download, and the install? Add the whole Crossfire folder to the exceptions list in Norton as well. -
Norton is the worst anti-virus protection you can get by the way, next to Mcafee, so this may be your problem.
When you re-downloaded Crossfire, were all your anti-viruses turned off during the download, and the install? Add the whole Crossfire folder to the exceptions list in Norton as well.
mmmm i think so , because when i installed norton before windows setup , the game stop working ... i`ll delete norton and try again , thank for help :rolleyes: -
Norton is the worst anti-virus protection you can get by the way, next to Mcafee, so this may be your problem.
When you re-downloaded Crossfire, were all your anti-viruses turned off during the download, and the install? Add the whole Crossfire folder to the exceptions list in Norton as well.
I don't think that's the problem mate, if it were it'd throw you and error message...
black screen eh?... do you hear sounds?? does it take a while to join a room?? -
I don't think that's the problem mate, if it were it'd throw you and error message...
black screen eh?... do you hear sounds?? does it take a while to join a room??
I think you`r right i removed norton , and the problem still occurred , and about your questions , i don`t hear anything , not alot of time.. -
Well many things could be wrong...
... let's begin with... what have you done, to solve the problem?
What's your usual ping in game ??
What's your gear?
ping 80+
gear GP Radio and Helmet and other 40% EXP
but why u asking about this ? -
PrinceHybird wrote: »ping 80+
gear GP Radio and Helmet and other 40% EXP
but why u asking about this ?
lol!... i meant your computer gear (Processor, Graphics, Memory, bla bla)... xD
try what c0lder suggested... I think a file installation didn't went well with the patcher v5... so a manual patch should fix that.
let us know how it goes. -
lol!... i meant your computer gear (Processor, Graphics, Memory, bla bla)... xD
try what c0lder suggested... I think a file installation didn't went well with the patcher v5... so a manual patch should fix that.
let us know how it goes.
RAM : 2GB , Processor : 3.0 , Graphics : VGA card 1GB -
PrinceHybird wrote: »RAM : 2GB , Processor : 3.0 , Graphics : VGA card 1GB
Your hardware should have nothing to do with this problem.
Since this problem occured around 4 days ago, I'm going to suggest that you do a System Restore: Start > Search > "System Restore". Select the restoration date in which your Crossfire was working (e.g: more than 4 days ago). This method is not recommended if you do work on your computer, as it'll delete any progress/applications you've saved from the restoration point, till' now. Otherwise, it's a very good method, and may solve your problem.
Also, I have a question. Was this problem occuring after, or before the latest patch? -
Your hardware should have nothing to do with this problem.
Since this problem occured around 4 days ago, I'm going to suggest that you do a System Restore: Start > Search > "System Restore". Select the restoration date in which your Crossfire was working (e.g: more than 4 days ago). This method is not recommended if you do work on your computer, as it'll delete any progress/applications you've saved from the restoration point, till' now. Otherwise, it's a very good method, and may solve your problem.
Also, I have a question. Was this problem occuring after, or before the latest patch?
it happen for me before 2days before the patch
and i cant do system restore because i dont have system restore point
so.. what should i do -
it happen for me before 2days before the patch
So this isn't a patch related issue then, thanks for telling me that.and i cant do system restore because i dont have system restore point
That's going to cause some trouble. I'll try and think of more solutions, but at this point in time, I have nothing else to suggest for you. Have you downloaded/installed anything out of the oridinary since this issue occured? -
Is microsoft security enabled?
Edit: If it is... disable it, restart the computer *Make sure the MSecurity Essentials is still disabled* re-install the game and execute it.
i payed crossfire for a year with microsoft security
and it just didnt work now!!!
i will try this anyway -
i payed crossfire for a year with microsoft security
and it just didnt work now!!!
i will try this anyway
I'm suggesting it because you stated on a previous post that the only thing you've done was updating your Microsoft Security Essentials, so I'm guessing that's the problem, maybe it detects Xtrap as a false positive... or maybe it's something different we don't know about... yet. -
I'm suggesting it because you stated on a previous post that the only thing you've done was updating your Microsoft Security Essentials, so I'm guessing that's the problem, maybe it detects Xtrap as a false positive... or maybe it's something different we don't know about... yet.
i reinstall it but it didnt work
i capyed my brother crossfire in my computer and it didnt work
i i closed all the processes that i can close it and it didnt work
what should i do
please help me !! please -
Try these:
Run Crossfire as Administrator
Run in compatability mode for Windows SP2
--
Please list your computer specifications as well. They can be found in:
Start > Run > dxdiag
ok,
Windows 7 Home Premium 64-bit
Processor: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz (2 CPUs), ~2.2GHz
Memory: 4096MB RAM
Card name: NVIDIA GeForce GT 230M
Display Memory: 2272 MB
Monitor Name: Generic PnP Monitor
Monitor Model: Nvidia Defaul
Monitor Id: SNY05FA
Native Mode: 1366 x 768(p) (59.940Hz)
Sound Devices
Description: Speaker/HP (Realtek High Definition Audio)
Description: Microphone (Realtek High Definition Audio)
i run Crossfire as Administrator
but i dont think that the computer specifications is the problem
as i said i play crossfire for 1 year
pleas help me
Categories
- All Categories
- Z8Games
- Off-Topic - Go To Game OT Forums
- 1 Z8 Forum Discussion & Suggestions
- 16 Z8Games Announcements
- Rules & Conduct
- 5.2K CrossFire
- 951 CrossFire Announcements
- 942 Previous Announcements
- 2 Previous Patch Notes
- 1.4K Community
- 122 Modes
- 600 Suggestions
- 85 Clan Discussion and Recruitment
- 274 CF Competitive Forum
- 19 CFCL
- 26 Looking for a Team?
- 700 CrossFire Support
- 52 Suggestion
- 116 Bugs
- 28 CrossFire Guides
- 166 Technical Issues
- 47 CrossFire Off Topic