Have a problem when scoping

zebbale1204 wrote: »

Yesterday, everything was fine. Today, I logged in and played some sniping. I realized that if I scope in and move (or jump) as the same time, there is a delay. It's like a sudden stop and then back to normal. Can anybody help me fix this? Thank you very much

Well I can try my best to help you. You say there is a delay, it may be due to your FPS. If it's lower than 15 that may be your issue at hand. Another thing may be your ping. If it 150-250, that may be your problem, but if it's 250+ it is most likely the dealio. Another thing you might try is changing your settings. Try playing on Low Texture, and make sure you are on the correct Bit client for your computer. The max is a 32-Bit I believe, so if you are using a 16-Bit make sure that is selected, if you're using a 32-Bit you can still use 16-Bit, but I think 32-Bit will run better. To check what you have, click the start button on your desktop, to the right, right-click computer, and scroll down and select, "Properties". Somewhere in there it should say your bit platform. You may also try disabling blood, weather effects, bullet trails/smoke, and other things like this. If all else fails, simply re-install or re-download Cross Fire. Good luck, and I hope you get it working correctly once more!