Rzer deathadder issue

moch_D · October 2010

It goes up and down easily, left and right not so much.
Help?
Should I return it?
I have Firmware 2.33
Driver 3.01

Whit3_W0lf · October 2010

http://forum.z8games.com/showthread.php?t=62521

try looking here

0xBoF · October 2010

Right click on the icon and make sure on the fly sensitivity is off.

CookieMunzta · October 2010

What's the polling rate at?

moch_D · October 2010

Downloaded a firmware update: 2.41
Polling rate @ 1000Hz
DPI @ 900

zeXattack · October 2010

put the rate at 125

moch_D · October 2010

zeXishere wrote: »

put the rate at 125

tried that, it's horrible now still.

moch_D · October 2010

HELP .
I have on clue what to do, I've never used a Gaming mouse before.

CookieMunzta · October 2010

moch_D wrote: »

Downloaded a firmware update: 2.41
Polling rate @ 1000Hz
DPI @ 900

It should never be that high for this game

Hmm I'd have suggested what the other guys said (125hz)

Maybe just lower/higher the x/y-axis speeds?

This is my current setting with a Habu (Deathadders twin) and it's the most comfortable for this game.
You could try those.

NOTE: The master acceleration is off, though it looks like it's on.

zeXattack · October 2010

moch_D wrote: »

tried that, it's horrible now still.

i have a mx518 even at 125 still feels weird. i just got use to it. with high mouse sense it feels better.

1ouie · October 2010

change x and y axis?

moch_D · October 2010

CookieMunzta wrote: »

It should never be that high for this game

Hmm I'd have suggested what the other guys said (125hz)

Maybe just lower/higher the x/y-axis speeds?

This is my current setting with a Habu (Deathadders twin) and it's the most comfortable for this game.
You could try those.

NOTE: The master acceleration is off, though it looks like it's on.

How do you change the settings for advanced sensitivity?

[MOD]BlindRob · October 2010

This is what I use and have no issues with it as far as aiming goes, note the firmware version.
10.09.2010-18.34.26.png

moch_D · October 2010

I don't have white arrows to change the X and Y axis, fix?

0xBoF · October 2010

moch_D wrote: »

I don't have white arrows to change the X and Y axis, fix?

There's a thing on the right a little fold out tab.
Just click on those and it should pop up. I can provide a screeny if necessary.

CookieMunzta · October 2010

moch_D wrote: »

How do you change the settings for advanced sensitivity?

There should be two little arrows that open up further options.

moch_D · October 2010

KillGod wrote: »

There's a thing on the right a little fold out tab.
Just click on those and it should pop up. I can provide a screeny if necessary.

I know how to pull up the menu, but when I get to the list where its like

10 10
9 9
8 8
etc
there is no arrows to change anything

0xBoF · October 2010

moch_D wrote: »

I know how to pull up the menu, but when I get to the list where its like

10 10
9 9
8 8
etc
there is no arrows to change anything

Oh, I had that once... If you restart your comp it will probably come back up... That happened to me when I first got mine.

Also make sure to NEVER close it in gamebooster.
It will give you BSOD

CookieMunzta · October 2010

moch_D wrote: »

I know how to pull up the menu, but when I get to the list where its like

10 10
9 9
8 8
etc
there is no arrows to change anything

Ahh it may be because you have the newer firmware.

Just try the numbers

it's effectively the same thing.

KillGod wrote: »

Also make sure to NEVER close it in gamebooster.
It will give you BSOD

This ^

Though it didn't give me BSOD, it sucks having your mouse fail mid-match

moch_D · October 2010

Thanks everyone, works now (Had to close and open it)

0xBoF · October 2010

Glad to

Rzer deathadder issue

Comments

Categories